臺灣亞德客調壓閥AR1500|AR2000

亞德客調壓閥AR1500|AR2000|BR2000|BR3000|BR4000

調壓閥工作原理:

調壓閥的原理是利用了彈簧力與壓力相平衡的原理，當彈簧的壓力小于氣壓的時候閥關閉，當壓力大于彈簧的彈力時候橡膠調壓膜片下方的壓縮空氣對膜片的作用力，推動膜片向上拱曲離開閥座而使空氣流入氣腔，此時卸荷活塞在氣壓作用下移動，將排放閥門推離閥座，于是由空氣壓縮機充入氣腔的空氣便通過排放閥和排氣口排入大氣空氣壓縮機空轉。

Pressure regulating valve working principle:

The principle of the pressure regulating valve is based on the principle of the spring force and pressure equilibrium, when the pressure is less than the spring pressure when the valve is closed, the elastic rubber film when adjusting pressure below the compressed air is greater than the spring force on the diaphragm, the diaphragm pushes the arched upward away from the seat and make the air into the gas chamber, the discharge with the movement of the piston under the action of air pressure, the discharge valve is pushed away from the valve seat, and an air compressor is filled into the gas chamber air through the exhaust valve and exhaust air into the air compressor idling.

調壓閥主要應用:

調壓閥種類眾多用途廣泛,主要用于交通,及工業民用領域。

Main application of pressure regulating valve:

Pressure regulating valve is widely used in many fields, mainly used in transportation, and industrial and civil areas.

產品特性：

1、結構輕巧聚湊，安裝使用方便；

2、壓入式自鎖機構，可防止調定壓力受外辦干擾而產生異動；

3、除標準形式外，另有低壓型可供選擇（最高可調壓力）0.4MPa）。

Product characteristics：

1, lightweight structure, easy to install and use;

2, pressure self-locking mechanism, which can prevent the setting pressure from foreign interference arising from the transaction;

3, in addition to the standard form, there is another type of low pressure type (maximum adjustable pressure) 0.4MPa.